Technical Specifications
Structural & Environment
- Dimensions
- 64×97×72(mm)
- Weight
- 239g
- Operating Temp
- -20°C~55°C(no freeze)
- Humidity
- 5~95%RH(condensation)
- Vibration
- 10~25Hz(XYZ 2G/30min)
Input Parameters
- Digital Input
- 8 channels
- AB Phase Counter
- 2×200kHz (X0X1,X2X3)
- High-speed Counter
- X0/X2:200kHz, X1/X3:20kHz
Certifications
- EMC Compliance
- FCC Class A, EN55032/35
- Insulation Test
- 1000V AC/1min
Power Specifications
- Input Voltage
- DC 24V±20%
- Load Capacity
- 0.3A/point, 1A total
Output Parameters
- Digital Output
- 8 channels
- Pulse Output
- 4×200kHz
- Output Type
- Transistor/NPN
- Max Load
- 6W (Resistive)
Interfaces
- Ethernet
- Supported
- USB Features
- Upload/Download & Online monitoring
Software
- Development Suite
- SamSoar2022
1.Powerful hardware and software configuration
●The hardware is based on the 32-bit micro-controller with Arm® Cortex®-M4 core, 200MHz main frequency, enhanced hardware anti-interference, stable response to grid power fluctuations, and ensuring continuous and efficient operation of the machine.
●Compiled underlying software guarantees a very short scan cycle, and its execution speed is more than 10 times that of interpreted PLC with the same configuration.
2.Abundantcommunication interface
●RS485 communication port, support Modbus RTU and free communication protocol
●full speed USB download port
●Download,monitor and debug PLC from any communication port
3.Flexible and comprehensive performance
●Host supports 4-way high-speed pulse output, 4-way high-speed counting input, with powerful motion control function.
●Powerful instruction function
●Based on the right expansion module of CAN communication, the maximum communication rate can reach 1Mbps, and 64 expansion modules can be expanded.
●The expansion module can be used as an independent control unit to run the program.
4.The upgraded host software SamSoar2022
●Compile speed<0.5 seconds, download speed<3 seconds, and allow online editing of programs
●SamSoar2022 supports instruction list, function block diagram, SFC step ladder diagram programming, user UI is highly customized, contains rich PLC instructions, and function blocks can be written in C language.
●The software adopts a compiled architecture to ensure that it cannot be decodedand the program cannot be cracked.
●The software has rich compatibility with competing products, and can directly convert ladder diagram programs of the same category into display and control ladder diagrams.
●PLC program can be downloaded through the display and control screen.
